Call Bahn Brenner Motorsports

BBM VR6 Oil Cooler Kit - Stainless Steel

BBM VR6 Oil Cooler Kit - Stainless Steel

Item Number:



Every watercooled VW needs an oil cooler other than the factory unit. Volkswagens simply run too hot of an oil temperature in stock form, especially the VR6. A high-output engine in a cramped engine compartment can generate a lot of heat. Not only do high engine temperatures contribute to lubricant breakdown, they also contribute to a shorter engine life and/or loss in overall horsepower. A properly installed oil cooler will give your car extra thermal cooling to keep heat under control during periods of peak demand. Oil lubricates best in the range of 180° to 212° F. Below this temp, the oil isn't hot enough to burn off harmful contaminants. Temps above 230°F, it starts to thin out and oxidize, reducing lubrication significantly. The Mocal thermostatic sandwich plates return oil to the engine when it's below 180°F, allowing the engine to warm up quickly. Once warm, the thermostat opens, and the oil flows to the cooler to keep temperatures within the ideal range. Kit includes: (1) Mocal VR6 Take-off Plate thermo (2) 1/2" x -10an unions (2) 1/2" sealing washers (8') 5/8" i.d. hose stanless FBA1000 (2) 90 degree hose ends (2) straight hose ends (2) adell clamps (2) oil cooler strap/bracket (1) assorted hardware nuts/bolts NOTE: Be sure to pick out your oil cooler heat exchanger for a complete bolt on kit!


It can be a challenge on some vehicles to mount oil coolers due to lack of space and mounting surfaces. On vehicles without air conditioning, the cooler can be mounted next to, or in front of, the radiator. On vehicles where oil cooling is more essential, a little ingenuity must be used to get the most airflow possible. If space is too limited at the front, the cooler can still function if mounted in a more horizontal fashion in the engine bay using the supplied steel brackets. If forced to mount close to the ground, use a heavy wire mesh type screen for protection. Even if your cooler is not directly in any sort of air stream, it can also work as a heat sink and will still offer much more vital engine protection than without an oil-cooler installed.


Price: $239.50   Quantity:

APPLICATIONS :   ( Vehicle Type & Year / Engine )
Audi TT Quattro 2003-2006 3.2L VR6
Corrado 1988-1995 Corrado VR6
Golf R32 2003-2006 3.2L VR6
Mk4 Golf / GTI 1999.5-2001 VR6
Mk4 Golf / GTI 2001-up VR6
Mk4 Jetta 2001-up VR6
Mk4 Jetta 1999.5-2001 VR6
MkIII Golf / GTI 1995 VR6 OBD1
MkIII Golf / GTI 1996-1999 VR6 OBD2
MkIII Jetta 1995 VR6 OBD1
MkIII Jetta 1996-1999 VR6 OBD2
Passat B3 Sedan 1993-1994 VR6 OBD1
Passat B3 Wagon 1993-1994 VR6 OBD1
Passat B4 Sedan 1995-1997 VR6 OBD2
Passat B4 Wagon 1995-1997 VR6 OBD2